Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 Pack: 1 x 600 GPD RO Membrane 2 Pack: 2 x 600 GPD RO Membrane 3 Pack: 3 x 600 GPD RO Membrane 4 Pack: 4 x 600 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 02:15:29 PDT, seller added the following information:
Wide Compatibility With the industry-standard 12″ x 2″ / 12″ x 3″ size, this high capacity RO element fits most standard 1812/3012 RO housing for the light commercial reverse osmosis water systems. Premium Material Our RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication. Deep Filtration The RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Authorized Certification Our Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 42/58 standards, providing safe-clean drinking water. Long Life Span Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality. DIY RO System Membrane Solutions Rreverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry. Important Information *It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. *The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. *Keep elements moist at all times after initial wetting. *To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. *The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. *Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Note Please check and confirm your choice of “Model” and “Pack”. For example, if you need 2 pieces of 100 GPD RO membrane filters, please choose “100 GPD” and “2 Pack”. On May 28, 2024 at 21:33:55 PDT, seller added the following information:
Wide Compatibility With the industry-standard 12″ x 2″ / 12″ x 3″ size, this high capacity RO element fits most standard 1812/3012 RO housing for the light commercial reverse osmosis water systems. Premium Material Our RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication. Deep Filtration The RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Authorized Certification Our Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 42/58 standards, providing safe-clean drinking water. Long Life Span Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality. DIY RO System Membrane Solutions Rreverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry. Important Information *It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. *The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. *Keep elements moist at all times after initial wetting. *To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. *The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. *Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Package Includes 36/50/75/100/150/200/300/400/500/600 GPD RO Membrane: 1 x RO Membrane 36/50/75/100/150/200/300/400/500/600 GPD RO Membrane Housing Kit: 1 x RO Membrane 1 x Housing 1 x Wrench 3 x Elbow Fitting On Aug 6, 2023 at 18:52:23 PDT, seller added the following information:
Standard Size: Membrane Solutions 6-stage filters set compatible with most 10″ standard under the counter reverse osmosis water systems, such as: APEC Water ESSENCE RO-PH90, ROES-PH75, ROES-PHUV75, FILTER-MAX-ESPH, FILTER-MAX-ESPHUV-SS Express Water ROALK5D, ROALKUV10M, FLTSETALKUV075, FLTSETALKUV115Q, FLTSETALKUV225Q, FLTSETALKUV0710, FLTSETALKUV1110Q, FLTSETALKUV2210Q, FLTSETALKUV10Q Geekpure RO5-MF, RO5-AF, RO6-UV, iSpring F9K, F10KU, F19K75, F21KU75, F31KU75, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO9S PureDrop RTW5AK, RTW5AK SimPure SP5-RO75, SP5-RO100, T1, T2 Ukoke RO75GP, UWFS01L *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. 100% Safe: Membrane Solutions water filters are made with high quality filtration components to protect and prolong the lifespan of your reverse osmosis system. Food-grade materials with ANSI/NSF 42/58 certification ensure your drinking water safe. 6 Filters Included: 1 x Sediment Filter (PP) 1 x Granular Activated Carbon Filter (GAC) 1 x Carbon Block Filter (CTO) 1 x 100 GPD RO Membrane Filter (RO) 1 x Post Carbon Filter (T33) 1 x Alkaline Filter (ALK) PP – Sediment Filter – 1st Stage Standard size: 10″ x 2.5″ 5 micron high-capacity (if you need 1 micron, 10 micron, 20 micron, 25 micron or 50 micron sediment filter, please make a note) Remove larger particles, dirt, silt, rust, sand, etc. Protects and extends the life of the membrane and system. Recommend replacing every 6 months (varies depending on the water source quality). GAC – Granular Activated Carbon Filter – 2nd Stage Standard size: 10″ x 2.5″ Remove chlorine, tastes, odors, VOCs, pesticides and herbicides, etc. Recommend replacing every 6 months (varies depending on the water source quality). CTO – Carbon Block Filter – 3rd Stage Standard size: 10″ x 2.5″ Remove chlorine, tastes, odors, VOCs, pesticides and herbicides, etc. Recommend replacing every 6 months (varies depending on the water source quality). RO – 100 GPD Reverse Osmosis Membrane Filter – 4th Stage Standard size: 2″ x 12″ Reject impurities down to 0.0001 microns, it can efficiently remove up to 99% of over 1,000 contaminants from your water, including heavy metals (primarily fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic, rubber mass, harmful minerals and another soluble salt from water. Recommend replacing every 2~3 years (varies depending on the water source quality). T33 – Post Carbon Filter – 5th Stage Standard size: 2″ x 10″ Only fit for the filter with 1/4″ Quick connect fittings Removes any taste or odor the water may have in the tank and create a sweeter water taste Recommend replacing every 1 year (varies depending on the water source quality) Note: 1/4″ Quick Connector Defaulted. If you need female thread connector, please send a picture to show your filter and fittings before setting order, we will help you. ALK – Alkaline Filter – 6th Stage Standard size: 2″ x 10″ Only fit for the filter with 1/4″ Quick connect fittings Made with all-natural mineral resources, enhance your drinking water by boosting pH and Oxygen levels while adding essential minerals including calcium, potassium, magnesium, and more. Recommend replacing every 6 months (varies depending on the water source quality). On Jan 21, 2024 at 23:22:38 PST, seller added the following information:
LG LT700P refrigerator water filter replacement cartridge ensures clean and fresh-tasting water by reducing contaminants such as chlorine, lead, mercury, and asbestos. This genuine OEM part is NSF certified to standards 42 and 53, providing a flow rate of 0.5 gpm and a 200-gallon capacity. Designed for easy installation, it typically requires replacement every six months to maintain optimal performance in compatible LG refrigerator models. The filter features a compact vertical design and is housed in its original factory sealed blister pack.
They perform just as well as the original parts. It’s suitable for all hard floors, including wood, tile, laminate, and marble. 【Efficiency Filtration & Odor Removal】The vacuum dust bag features a 3L large capacity.
♥Compatible withModel: Fit for Xiaomi Roborock S7 S7+ S7 MaxV, S7 MaxV Plus T7S T7 plus T7S plus Robot Vacuum. ♥ Material: Compatible and work just like the original one, The side brush will not scratch the floor and furniture, greatly ensure the safety and cleaning effect during the process of the use.
If you are using your vacuum on a daily basis you will need to replace the brush roll much more frequently. The high-quality main brush is designed to effectively collect dust and debris from your floors.
Exquisite Boxed Set – Includes 8 dust bags, 8 mop pads, 8 filters, 6 side brushes, and 2 rubber main brushes. Neatly organized for easy access, convenient storage, and also suitable for gifting. No Local Pickup.
- 1
- 2