Premium Material: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 58 standards, providing safe-clean drinking water. Depth Filtration: 400 GPD RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Wide Compatibility: Membrane Solutions ROULP-3012-400 reverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry. With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Long Life Span: Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality. Package Includes: 1 Pack: 1 x 400 GPD RO Membrane, 1 x Housing, 1 x Wrench, 3 x Fitting 2 Pack: 2 x 400 GPD RO Membrane, 2 x Housing, 2 x Wrench, 6 x Fitting 4 Pack: 4 x 400 GPD RO Membrane, 4 x Housing, 4 x Wrench, 12 x Fitting 6 Pack: 6 x 400 GPD RO Membrane, 6 x Housing, 6 x Wrench, 18 x Fitting 8 Pack: 8 x 400 GPD RO Membrane, 8 x Housing, 8 x Wrench, 24 x Fitting 10 Pack: 10 x 400 GPD RO Membrane, 10 x Housing, 10 x Wrench, 30 x Fitting Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Important Information: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 Membrane Solutions ROULP-1812-50, ROULP-1812-75, ROULP-1812-100, ROULP-2012-150 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filtration Precision: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 1 x 36 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.On Jun 22, 2024 at 11:29:04 PDT, seller added the following information:
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 Membrane Solutions ROULP-1812-36, ROULP-1812-50, ROULP-1812-75, ROULP-2012-100 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 1 Pack: 1 x 150 GPD RO Membrane 2 Pack: 2 x 150 GPD RO Membrane 4 Pack: 4 x 150 GPD RO Membrane 6 Pack: 6 x 150 GPD RO Membrane 8 Pack: 8 x 150 GPD RO Membrane 10 Pack: 10 x 150 GPD RO Membrane 20 Pack: 20 x 150 GPD RO Membrane 25 Pack: 25 x 150 GPD RO Membrane 50 Pack: 50 x 150 GPD RO MembraneOn Jun 20, 2024 at 22:45:22 PDT, seller added the following information:
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, depends on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: XXGPD: 1 x RO Membrane Filter XXGPD+Housing: 1 x RO Membrane Filter 1 x Housing 3 x Quick-Connect Fitting 1 x WrenchOn Sep 2, 2023 at 10:01:59 PDT, seller added the following information:
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 Membrane Solutions ROULP-1812-36, ROULP-1812-100, ROULP-2012-150 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filtration Precision: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 50GPD – 1 Pack: 1 x 50GPD RO Membrane 50GPD – 2 Pack: 2 x 50GPD RO Membrane 75GPD – 1 Pack: 1 x 75GPD RO Membrane 75GPD – 2 Pack: 2 x 75GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On Jun 20, 2024 at 16:25:09 PDT, seller added the following information:
Safe Material & High Quality Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 58 standards, providing safe-clean drinking water. High Stabilized Salt Rejection 50 GPD RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal & Standard Size Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most reverse osmosis water filtration system. Wide Compatibility With a universal size of 11.75 x 1.75″, Membrane Solutions Reverse Osmosis (RO) membrane fits most 10 Inch industry-standard RO systems. Model or Part Number Including but not limited to: APEC Water Systems RO-90, ROES-50, ROES-PH75, ROES-UV75, RO-Hi, RO-PERM Aquatic Life RO Buddie (Part No. 330084) Dow Filmtec TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100, TW30-1812-150 Express Water RO10DX, RO10MX, RO10XC, RO5DX, RO5M, RO5X GE GXRM10RBL, GXRV10ABL, GXRV10ABL01 (Part No. FX12M) GeekPure RO5-PLUS, R05-MF H2O Splash RO Systems Home Master TMAFC, TMHP iSpring RCC1P, RCC1UP, RCC1UP-AK, RCC7, RCC7AK, RCC7AK-UV, RCC7D, RCC7D2, RCC7P, RCC7P-AK, RCC7U (Part No. MC5) Max Water Residential RO Systems PureGen ERO-550, EROUV-650 SimPure T1, T2, etc. Long-Life The membrane element, shipped dry in an original sealed package, has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. Package Includes 1 Pack: 1 x RO Membrane 5 Pack: 5 x RO Membrane 10 Pack: 10 x RO Membrane 15 Pack: 15 x RO Membrane 20 Pack: 20 x RO Membrane 25 Pack: 25 x RO MembraneOn Apr 17, 2024 at 07:45:21 PDT, seller added the following information:
Standard Size: Compatible with most under-sink reverse osmosis (RO) water filtration systems from 3-stage to 7-stage to reduce sediments, chlorine, organic chemicals, suspended particles, bad tastes and odors in water to improve the quality of household water. Compatible Models: APEC ROES-50, ROES-75, ROES-UV75, ROES-UV75-SS, ROES-PH75, ROES-PHUV75, RO-90, RO-PH90, ROES-100, RO-Hi, RO-PERM, RO-PUMP, WFS-1000 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M FS-TFC FS-RO-100G-A GE FX12P, FX12M, TFM-24, GXRM10RBL, GXRM10G, GXRV10ABL, PNRV12 Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK-UV, RTW5U Simpure DB1025, T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. CTO – Carbon Block Filter Standard size: 10″ x 2.5″ Micron Rating: 5 micron Material: High-quality Coconut Shell Activated Carbon Capacity: 15,000 Gallons Lifespan: 6 Months (Depends on average feedwater quality, temperature, and incoming water pressure) Functions: Effectively removes not only 99% of sediment, rust, silt, sand, iron, and other undissolved particulates, but also reduce the chlorine, odors to improve the water taste and quality. RO – 75 GPD Reverse Osmosis Membrane Filter Standard Size: 11.75″ x 1.75″ (Fit in standard 1812/2012 residential-style RO membrane housing) Micron Rating: 0.0001 Micron Material: Polyamide Thin-Film Composite Capacity: 75 GPD (Gallons per Day) Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed Pressure: 60 psi Certification: NSF/ANSI 58 Lifespan: 2-3 Years (Depends on average feedwater quality, temperature, and incoming water pressure) Functions: Effectively removes heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Package Includes: 2 x Carbon Block Filter 1 x 75 GPD RO Membrane FilterOn Jun 12, 2024 at 07:27:28 PDT, seller added the following information:
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 Membrane Solutions ROULP-1812-36, ROULP-1812-50, ROULP-1812-75, ROULP-2012-150 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 100GPD RO: 1 x 100GPD RO Membrane 100GPD RO+Housing+Wrench+Fittings: 1 x 100GPD RO Membrane, 1 x Housing, 1 x Wrench, 3 x Fitting Housing+Wrench+Fittings: 1 x Housing, 1 x Wrench, 3 x Fitting Housing: 1 x Housing Wrench: 1 x Wrench Fittings: 3 x FittingOn Jun 20, 2024 at 23:02:59 PDT, seller added the following information:
Premium Material: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 58 standards, providing safe-clean drinking water. Depth Filtration: 500 GPD RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Wide Compatibility: Membrane Solutions ROULP-3012-500 reverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry. With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 3012 RO housing for the light commercial reverse osmosis water systems. Long Life Span: Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality. Package Includes: 1 Pack: 1 x RO Membrane 2 Pack: 2 x RO Membrane 4 Pack: 4 x RO Membrane 6 Pack: 6 x RO Membrane 8 Pack: 8 x RO Membrane 10 Pack: 10 x RO Membrane 12 Pack: 12 x RO Membrane 20 Pack: 20 x RO Membrane Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Important Information: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility.On Feb 20, 2023 at 18:27:37 PST, seller added the following information:
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, depends on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 36GPD – 1 Pack: 1 x 36 GPD RO Membrane 36GPD – 2 Pack: 2 x 36 GPD RO Membrane 36GPD – 3 Pack: 3 x 36 GPD RO Membrane 50GPD – 1 Pack: 1 x 50 GPD RO Membrane 50GPD – 2 Pack: 2 x 50 GPD RO Membrane 50GPD – 3 Pack: 3 x 50 GPD RO Membrane 75GPD – 1 Pack: 1 x 75 GPD RO Membrane 75GPD – 2 Pack: 2 x 75 GPD RO Membrane 75GPD – 3 Pack: 3 x 75 GPD RO Membrane 100GPD – 1 Pack: 1 x 100 GPD RO Membrane 100GPD – 2 Pack: 2 x 100 GPD RO Membrane 100GPD – 3 Pack: 3 x 100 GPD RO Membrane 150GPD – 1 Pack: 1 x 150 GPD RO Membrane 150GPD – 2 Pack: 2 x 150 GPD RO Membrane 150GPD – 3 Pack: 3 x 1506 GPD RO MembraneOn Mar 21, 2024 at 18:22:21 PDT, seller added the following information:
- 1
- 2